JVC RX-772VBK manual Selecting the Surround Modes Also see pages, 3CH LOGIC adjustment menu

Selecting the Surround Modes (Also see pages 24)

1.Press MENU.

The MAIN MENU appears on the TV.

2. Press %/ Þto move to “SURROUND,” then press @/ #.

The SURROUND MODE menu appears.

3. Press %/ Þ to move to one of the surround modes.

If you want to adjust the selected mode, go to the following steps.

4.Press MENU.

The MAIN MENU appears on the TV again.

5. Press %/ Þto move to “SURROUND ADJUST,” then press @ / #.

The adjustment menu for the mode you have selected in step 3 appears.

6.Press %/ Þto move to the item you want to set or adjust, then press @/ #. On these adjustment menus, you can do the following:

For HALL:
“REAR”:	Adjust the rear speaker output level.
“DELAY”:	Adjust the delay time of the rear speaker sound.
For Dolby Pro Logic:
“CENTER MODE”:	Select the center mode.
“TEST”:	Output a test tone.
“CENTER”:	Adjust the center speaker output level.
“REAR”:	Adjust the rear speaker output level.
“DELAY”:	Adjust the delay time of the rear speaker sound.
“CENTER TONE”:	Select the center tone.
For Dolby 3ch Logic:
“CENTER MODE”:	Select the center mode.
“TEST”:	Output a test tone.
“CENTER”:	Adjust the center speaker output level.
“CENTER TONE”:	Select the center tone.

7.When you finish, press MENU EXIT. The menu disappears from the TV.

SURROUND MODE menu

HALL adjustment menu

PRO LOGIC adjustment menu

3CH LOGIC adjustment menu

Page 34