SOUND
CONTROL
SURR MODE
+10
100+
DELAY
1
TEST
4
REAR
5 6
CNTR
2 3
TEST
4
Remote Control
From the remote control:
Note:
If you want to use the remote control for adjusting the center mode and the center tone, use the menu function (see page 34).
1.Press SOUND CONTROL.
The remote control is activated for adjusting the sound.
2.Press SURR MODE until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the display.
The PRO LOGIC or 3CH LOGIC indicator (as well as the SURROUND indicator) also lights up. Each time you press the button, the surround modes change as follows (the indicator of the selected surround mode also lights up on the display):
PROLOGIC 3CHLOGIC HALL
SURR OFF
(Surround Off)
3.Press DELAY to adjust the delay time of the rear speaker output. Each time you press the button, the delay time changes as follows:
DELAY 1 DELAY 2
DELAY 4 DELAY 3
Note:
When you have selected “3CHLOGIC,” you cannot adjust the delay time.
4.Press TEST to start checking the speaker output balance.
“TEST” starts flashing on the display, and a test tone comes out from the speakers in the following order:
Left front speakerCenter speaker Right front speaker Rear speakers
Notes:
•No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”
•No test tone comes out of the center speaker when you select “PHANTOM” or “OFF” for the center mode.
5.If necessary, adjust the speaker output balance as follows:
•To adjust the rear speaker output level, press REAR
•To adjust the center speaker output level, press CNTR
Pressing – decreases the output level up to
Pressing + increases the output level up to +10 dB.
Notes:
•You cannot adjust the left and right rear speakers output level separately.
•You cannot adjust the rear speakers output level when you have selected “3CHLOGIC.”
•You cannot adjust the center speaker output level when you select “PHANTOM” or “OFF” for the center mode.
6.Press TEST again to stop the test tone.
Page 29