CK Electric Part C3000 manual Press when you want to resume printing

4RESOLUTION button

Press this to select the resolution the MultiPASS C3000 will use for the document you want to fax or copy.

5One-Touch Speed Dial/Function buttons

Use for one-touch speed dialing, entering user information, printing documents stored in memory, and cleaning the print head.

6FUNCTION button

Use to register user settings, to run the print head cleaning process, or to print faxes stored in the MultiPASS C3000’s memory.

7CARTRIDGE button

Press to move the BJ cartridge holder to the center of the printer unit when installing or replacing the cartridge. (Press again after installing the cartridge to move the holder back to its home position.)

8RESUME button

Press when you want to resume printing.

9PRINTER RESET button

Press to reset the printer.

10Arrow buttons

Use to scroll through menu selections, or to move the cursor when registering data.

11STOP button

Press to cancel sending, receiving, or any other operation.

12ALARM lamp

Flashes when an error occurs, when the MultiPASS is out of paper or ink, or when received faxes are stored in memory.

13START/COPY button

Press to begin sending, receiving, copying, or other operations, or to select functions when registering information.

14CODED DIAL button

Press this button (followed by a two-digit code) to dial a number that you have registered for coded speed dialing.

15Number buttons

Use these buttons to enter numbers and names when registering information, and to dial fax/telephone numbers that are not registered for automatic dialing.

Introduction

Chapter 1 Introduction 1-7