Samsung SDM-160N manual When desiring to see in the PIP screen

Digital Multiplexer

When desiring to see in the PIP screen

The PIP (picture in picture) screen may be seen using the “PIP” button on the FULL screen in the LIVE mode. The size of the PIP sub-screen is set in the “PIP SIZE” of the “2. MON OUT SET” on the pro- gram menu. The sub-screen is automatically and sequentially converted if pressing the “SEQUENCE” button.

➢Method to use

1.Press the “PIP” button.

2.Press the “SET”. In this case the LED of the “SET” button blinks and the border line blinks. Then, set the sub-screen of the PIP screen to a desired channel.

3.Press the “SET” button if completing the channel setting. In this case the LED of the “SET” but- ton turns off.

4.Fix the position of the sub-screen using the “MOVE” button. The position of the sub-screen may be selected in 4 cases of right upper, left below, right upper, right below.

➢The “PIP” button does not operate in the following cases:

-In replay mode or TRIPLEX mode

-In division screen

-In automatic sequential conversion mode

-In zoom operation

-In setting program mode

-In displaying ALARM/LOSS LIST on screen

When desiring to see in the record screen

You can see the record output screen in the live mode using the “REC CHECK”.

When desiring to see output of VCR as it is

You can see the output screen of VCR using the “REC CHECK” button in the replay mode. This mode is useful when adjusting MENU of VCR.

➢The “REC CHECK ” button does not operate in the following cases:

-In zoom operation

-In setting program mode

-In displaying ALARM/LOSS LIST on screen

ENGLISH

4-5