Digital Multiplexer

6. Remote Control using SSC-1000(RS-485)

Refer to SSC-1000 manual

1.RS-485 Address set-up : Only odd numbers are available.(from 1 to 253)

2.Get into Control Mode by pressing “MUX CONTROL”(SSC-1000) button.

3.“MON” Address set-up(SSC-1000)

! MONITOR OUT CONTROL

RS-485 Address set-up value input.(“MON” button → Address input → ENTER)

@SPOT OUT CONTROL “Address set-up value” +1 input.

(“MON” button → “Address + 1” input → ENTER)

4.MONITOR OUT CONTROL

Refer to SSC-1000’s CONTROL PANEL (One to one with front panel)

5.SPOT OUT CONTROL

-With select input channel. chcannel fixed output.

-With select “HOLD(SEQUENCE)” button, switching screen output. (Switching output according to “SPOT OUT” set-up)

3-5

Page 18
Image 18
Samsung SDM-160N manual Remote Control using SSC-1000RS-485, Monitor OUT Control, MON button → Address + 1 input → Enter