Assembling the Remote Control and Mounting the Cradle

9 • Assembling the Remote Control and Mounting the Cradle

After removing the control from the box, shut off power to the room you will be working in at the breaker box.

Caution: Do not restore power until all work is complete.

9-1. Pull the knob off of the speed

Steps 9-1 – 9-4

control unit and remove your existing

switch from the switch box.

9-2. Connect each black lead from the

Black

speed control to a black lead from the

switch box with a wire connector.

Note: If two white wires are present in

your switch box, connect them to each

Black

other if not already and secure with a

wire connector.

9-3. Carefully tuck the wires back into

Black

the switch box and slide the back of the

speed control into the switch box as well.

White

9-4. Line the two screw holes on the control’s metal tabs with those on the

switch box and attach using the two flat head screws that came with the switch box.

9-5. Mount the faceplate (not included) to the control with two #6-32 screws that you removed earlier from the faceplate.

9-6. Attach the knob onto the post on the speed control and turn to the left for the OFF position.

Step 9-5

Step 9-6

45084-01 • 01/17/12 • Hunter Fan Company