Hunter Fan Type installation manual Installing the Canopy and Canopy Trim Ring

6 • Installing the Canopy and Canopy Trim Ring

6-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket.

6-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy.

6-3. Twist canopy clockwise to secure.

Steps 6-1 – 6-2 Hanger Bracket

6-4. Install third & fourth canopy screw in round hole on canopy. Securely tighten all four screws.

6-5. Using both hands, push the canopy trim ring up to the top of the canopy.

6-6. Twist canopy trim ring clockwise to secure the canopy.

Should you need to remove the canopy trim ring:

1.Twist canopy trim ring counter clockwise until it releases from canopy.

Canopy

Canopy Trim Ring

Step 6-3

Step 6-4

Step 6-5

Canopy Screw

11

45084-01 • 01/17/12 • Hunter Fan Company