CK Electric Part C3000 manual Resending a Fax After an Error, To Cancel Automatic Redialing

	To Cancel Automatic Redialing
STOP	To cancel automatic redialing, press the STOP button. However, you
	cannot cancel redialing while the LCD displays AUTO REDIAL (the unit is
	waiting to redial). In this case, wait until dialing begins and then press
	STOP to cancel redialing. The MultiPASS C3000 asks you to confirm:
		CANCEL? *YES #NO

To cancel the redialing, press *. The MultiPASS C3000 beeps and the LCD displays:

TX/RX CANCELLED

TX/RX NO. XXXX

The unit then prints an error report:

PRINTING REPORT

Resending a Fax After an Error

If you get an error while sending a fax from memory, the MultiPASS C3000 can resend it to the same destination without having to rescan it. To do this, the On Error Resend option must be set in the Advanced: Send Fax dialog box of the MultiPASS Desktop Manager. See page 8-5 for details.

You can also set how much of the fax is sent again:

❍The pages following the page on which the error occurred (ERROR PAGES)

❍The first page of the document and the pages following that on which the error occurred (ERROR & FIRST PAGES)

❍The entire document (ALL PAGES)

N The fax is erased from memory after it is successfully sent or after the resending fails.

Sending Faxes

Chapter 4 Sending Faxes With the MultiPASS C3000 4-7