CK Electric Part C3000 manual Error Correction ECM

❍Error Correction (ECM)

You select this option to reduce system and line errors when sending a fax. With this option selected, the system checks each outgoing fax for lost data. If data has been lost from a portion of a page, the system transmits that portion again after confirming that all data within that portion can be transmitted successfully.

❍Auto Start Send

When you select this option, the MultiPASS C3000 starts scanning automatically five or ten seconds after you enter a phone number. When you don’t select this option, you must press START/COPY to scan the document, or the unit returns to standby mode after 60 seconds.

❍Off Hook Alarm

You select this option to turn on the alarm if the telephone’s handset is off hook.

❍Image

You select a contrast setting that determines the level of contrast in the faxes you send. The Standard setting is usually appropriate for most documents. However, based on the lightness or darkness of your original fax document, you may prefer to lighten or darken the contrast for the fax transmission.

❍Fax Heading

You select the position where you want the sent fax heading information (your fax number, your name, and date and time) to print on the faxes you send. This information is known as the Transmit Terminal Identification (TTI). It can be printed either inside or outside the image area of your fax page.

❍On Error

You select Resend option if you want the MultiPASS C3000 to automatically redial when an error occurs while sending a fax. You also select which pages are to be resent: only the page on which the error occurred, the page on which the error occurred and the first page of the fax, or all pages.

8-6 Setup and Other Utilities in the Desktop Manager Chapter 8