Tasco 119200W instruction manual Bold=default Mode, Format

Menu Item	Settings	Description
	(Bold=default)
Mode	2M, 5M (with	Select “Mode” and press OK. Use
	Mode set to	UP/DOWN to select 1P (single
	1P or 3P for	photo), 3P (burst of 3 photos), or
	photos),	Movie (video mode). Press OK.
	5-60 Sec (in	Use UP/DOWN to set LO (2MP)
	Movie (video)	or HI (5MP) still photo resolution
	mode)	(High resolution provides higher
		quality photos, low resolution
		allows you to store more photos
		on the SD card), or video length
		from 5-60 sec. (if video mode was
		selected).
Format	FO/NO,	Deletes (erases) all files stored
	Y/N	on a card to prepare it for reuse.
		Always format a card that has
		been previously used in other
		devices. Caution! Make sure you
		have downloaded and backed
		up any files on the card that you
		want to preserve first! Press UP to
		select “FO”, press OK, then select
		“Y” (Yes) and press OK again to
		confirm you want to format the
		card. The extra step and “No”
		defaults help prevent accidental
		erasure of all your photos/videos.

When you’ve finished using the Setup Menu, and are ready to return the camera to normal operating mode, so it will begin to capture photos or videos for you, simply press the SETUP button. After you exit the Setup Menu, the display will go blank and the camera is in “sleep” mode. About 30 seconds later, the camera will begin taking photos or videos when triggered, at intervals determined by the trigger delay time setting.

11