ABOUT THE SETUP MENU
Slide the power switch to the On position. You’ll see“WAIT”on the display, then the setup menu screen. Before you start using the camera, you’ll no doubt want to set the date/time so they are imprinted correctly on your photos, and maybe change the trigger delay time and image resolution to your preferences. This is done by editing the settings of an item listed in the Setup Menu.
To enter the Setup Menu at any time, press the SETUP button (to left of the power switch).
USING THE SETUP MENU
The Setup Menu has 5 different items, which appear on a list in the left frame of the display. Here’s how to edit (change) the setting of a menu item:
1.Select the menu item you want to edit by pressing the UP or DOWN button until the item is blinking. Note: you can see the current/ default setting for each item (without changing it) in the main center frame as you move up and down the list of items.
2.Press the OK button.
3.You can now select the setting you prefer for the selected item by pressing the UP or DOWN button. The setting displayed in the center frame will blink until you press OK to confirm it is the setting you want to save.
4.To exit the Setup menu at any time, simply press the Setup button.
SETUP MENU DISPLAY
SELECTED MENU ITEM
Battery Level
CURRENT
SETTING OF SELECTED ITEM
Indicates Photo (1P or 3P) or Movie Mode
9
