Digimerge DH200 setup guide Basic Setup, Navigation And Controls, Set-Uplocal Viewing On Your Pc

Right for Business

BASIC SETUP		BASIC SETUP		NAVIGATION AND CONTROLS		SET-UP LOCAL VIEWING ON YOUR PC
	BASIC INSTALLATION GUIDE		BASIC INSTALLATION GUIDE		BASIC INSTALLATION GUIDE		LOCAL VIEWING INSTALLATION GUIDE
STEP 1	Time: 20 Minutes Hand Tools Skills - Easy	STEP 1	Time: 20 Minutes Hand Tools Skills - Easy	STEP 2	Time: 20 Minutes Skills - Easy	STEP 3	Time: 30 Minutes Hardware Skills - Intermediate
							PC/Router

easy Continued easy easy

DH200Series Digimerge Touch DVR

Connecting Cameras (not included)

1Connect up to eight BNC cameras to the BNC ports on the rear panel.

NOTE: Test the cameras prior to selecting a permanent mounting location by temporarily connecting the Cameras and Cables to your DVR.

Quick Setup

6	By default, the system
	has Quick Setup enabled.

Quick Setup lets you quickly adjust the time and record mode on the system. The system menu will appear as the Quick Setup menu with only Time and Record options available.

Disabling Quick Setup

You must disable Quick Setup in order to access the full system main menu.

To disable Quick Setup:

1.In Quick Setup Menu under the ADVANCED tab, select RUN ADVANCED.

2.Select ON and press the ENTER button. The window closes. Quick Setup has been disabled. The full main menu will appear when you press the MENU/ESC button.

Using the Main Menu

1Press the MENU/ESC button on the front panel or the remote control.

1. DISPLAY	1
2. CAMERA
3. MOTION	2
4. RECORD
5. ALARM	3

5

6 7

This step relates to remote viewing over the LAN (local area network) by using a PC located on the same network as that of the DVR.

Retrieve the DVR Information

1To find the IP and MAC addresses, press the  (REWIND) button on the remote control or

1.Open the MAIN MENU and select SYSTEM.

2.Under the INFO tab, you will find your system’s IP address.

Quick Setup Guide

PACKAGE CONTENTS:

1 x DIGITAL VIDEO RECORDER WITH PRE-INSTALLED HDD* 1 x POWER ADAPTOR

Connecting the USB Mouse

2Connect a mouse (USB/PS2 compatible) to the USB port on the rear panel.

Mouse Tips

When using the mouse, the ENTER and EXIT buttons appear in the top-right corner of every menu window. When you change

Managing Passwords

	By default, you do not have to enter a
7
	password upon initial startup.

However, you can enable this option in MAIN Menu>System>General. For more details, please refer to the user’s manual.

NOTE: This step refers to accessing the MAIN MENU without enabling the Quick Setup.

	6. SCHEDULE	4
	7. NETWORK
	8. SYSTEM
Using a Mouse
	1. Left-Button:While in a split-screen display mode,
2
	double-click an individual channel to view it in full-
	screen; double-click again to return to the split-		1
	screen display mode. While navigating menus, click
	to select a menu option; double-click to open the next

8

3 2

1 x REMOTE CONTROL

1 x MOUSE

1 x USER MANUAL

1 x QUICK START GUIDE

1 x SOFTWARE CD

ATTENTION:

•* Channel/ Port configuration and HDD (hard disk drive) capacity may vary by model. Check your package for specific content information.

•Monitor and Cameras are not included.

•Ethernet Cable, Broadband Router and Computer are required for local and remote monitoring (not included).

•For detailed setup and software information, please refer to your printed User’s manual (included).

It’s all on the Web w w w. d i g i m e rg e . co m

system settings and configurations, click to confirm your changes.

Connecting a Monitor (not included)

	Connect the VGA cable (not
3a
	included) from your LCD monitor
	to the VGA port on the rear panel
	of the Touch DVR.
	OR	OUT
	From one of the Video-Out ports
3b			IN
	connect a BNC terminated cable
	to a TV or CCTV monitor.
			OUT

Connecting the Ethernet Cable

4	Connect one end of the Ethernet
	cable (not included) (for remote

Setting the Date & Time

8	Stop recording (including Manual and
	Schedule recording) on the system by
	pressing/on the front panel, or
	pressing the  button on the remote
	control and enter your 6-digit system
	password (by default, 000000).
	1.	Press the MENU/ESC button to open the
		system menu. Select SYSTEM and press
		the ENTER button. The System menu
		opens.
	2.	Select the TIME tab.
	3.	Select DATE and enter the date
		(mm/dd/yyyy).
	4.	Select TIME and enter the time
		(hh/mm/ss).
	5.	Press the ENTER button located at the
		top right corner of the screen to save
		your changes.
	6.	Press /on the front panel, or press
		the  button on the remote control to
		resume Continuous Recording.

NOTE: This step refers to accessing the MAIN MENU without enabling the Quick Setup.

NOTE: It is highly recommended to set the time on the system prior to doing any recording. All recording must be stopped on the system in order to set the time.

NOTE: If using the mouse right click and then click  on the Virtual Remote.

Stopping Scheduled Recording: If you need

to stop a recording schedule, press		on
the front panel or	on the Remote conrol

and enter your 6-digit system password (by default, 000000).

menu.

2.Right-Button:Right-click anywhere on the screen to open the Virtual Remote; double-click anywhere on the screen to return to the previous menu.

3.Scroll-Wheel:Move the scroll wheel up or down

to increase/decrease the value of a selected menu option.

Touch Panel Tips and Tricks

	If using the Touch panel, you will often use the following
3
	buttons when controlling the system:
	• CLR	: Menus: move cursor up; Playback: pause playback; Live
	viewing: show/hide OSD; clear channel icons
	• / : Menus: move cursor down; Playback: stop playback;
	Live viewing: open Log menu
	• / : Menus: move cursor left; Playback: increase reverse
	playback speed; Live viewing: start/stop recording
	• / : Menus: move cursor right; Playback: increase forward
	playback speed; Live viewing: start/stop scheduled recording
	• Press the MENU/ESC button to open the main menu and
	close windows.
	• Press the		button to increase values for selected menu options.
	• Press the		button to decrease values for selected menu options.
	• Press the		button to enter/confirm.	1
Using the Virtual Remote
	Right-click anywhere on the screen to open the

	Record the IP and MAC Addresses in the section below:
	IP ADDRESS :	.		.			.
	MAC ADDRESS :		:		:		:	:	:
	(Required for DDNS registration)
Install Software (on your local computer):
	Insert the software CD into your
2
	computer’s CD/DVD-R drive. At					included
	the prompt, run or double-click
	NetViewInstaller.exe					Computer - not

DVR NetView Software (on your local computer):

Toll free tech support available after completing product registration. For more information on this product, firmware updates,

monitoring) to one of the router’s

(not included) LAN ports and the

other end to the DVR’s Network

Port.

Powering ON the Touch DVR

Using the Remote Control

9	1.	LED Indicator: Flashes red with
		every button-press
	2.	POWER: Press to power the system
		ON/OFF (password required).
	3.	Navigation/Menu
	4.	: Press to switch between single

1
2	9
3	10
	11
4
	12
5

4 Virtual Remote. The Virtual Remote gives you		2
quick acces to many of the system’s features
using only a USB mouse (included).
1.	Quick Function Keys	3
2.	Navigation/Menu
3.	Playback controls	4
4.	Channel Buttons

	Follow the installation screens to
3
	complete DVR NetView Software
	installation.

warranty and accessory products, please visit us at: www.digimerge.com

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Digimerge Technology Inc. reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2009 Digimerge. All rights reserved.

5Connect the power cable to the DC port on the rear panel of the DVR. Touch the POWER button on the front panel OR press the POWER button on the remote control. At startup, the system performs a basic system check and runs an initial loading sequence. After a few moments, the system loads a live display view.

Note: You will need to input your system password (by default, 000000) to power off the system. Note: Pressing the “Power” button after plugging in the power cable is only necessary for initial startup (first time out of the box).

	channel full-screen, quad, and
	split-screen displays.
5.		: Press to confirm menu options/
	selections.
6.	Playback controls
7.	Channel buttons: Press to view
	channels 1~8.
8.		Press to open the Time Search
	menu.
9. CANCEL/ESC: Press to close menu

windows.

10. + increase values.

11. - decrease menu options.

12.  Press to start manual recording.

6

7

8

Note: You can use the channel buttons on the remote control to enter numbers, letters, and other characters.

Using the Virtual Keyboard
5	When configuring certain options, such as
	Camera Title, the Virtual Keyboard opens

to make mouse input easier.

Congratulations! You have completed STEP 1 & 2 successfully. Your DVR is now ready to use. Refer to the owner’s manual to learn how to record, playback, use the search features and all other features available with this DVR.

4	Once the installation finishes,
	click Close. A shortcut icon
	appears on your desktop.

DH200 Touch Series Quick Setup Guide - English - R1