4-80 System Configuration
No. | Error message | Action |
|
| representative. |
7 |
| Check the network environment. |
| The RMCP+ transmission failed. | If there is no network problem, contact your service |
|
| representative. |
8 | The specified RMCP+ protocol | Check the network environment. |
| If there is no network problem, contact your service | |
| cannot be used. | |
| representative. | |
|
| |
9 | BMC resources to establish a new | Try again after a connection from other client is |
| RMCP+ session are insufficient. | finished. |
10 | The RMCP+ session | Check the network environment and server. |
| If you do not find any problem, contact your service | |
| occurred. | |
| representative. | |
|
| |
11 |
| Check the network environment and try again. |
| The HTTP communication failed. | Contact your service representative if the error |
|
| persists. . |
BMC-related error
No. | Error message | Action |
1 |
| The network may be busy. Try again. If the error |
| The IPMI request was aborted. | persists, contact your service representative because |
|
| a failure may have occurred in BMC. |
2 | Received bad response from | Check the server. A failure may have occurred in |
| BMC. | |
| BMC. | If you do not find any problem, contact your service |
|
| representative. |
3 | BMC does not support IPMI 2.0 | Contact your service representative. |
| functions. | |
|
| |
4 |
| Check the server. A failure may have occurred in |
| Failed to run the IPMI command. | BMC. |
| If you do not find any problem, contact your service | |
|
| |
|
| representative. |
5 |
| Check the network environment. |
| Failed to send the IPMI message. | If the network has no problem, contact your service |
|
| representative. |
6 | Illegal IPMI message was | Contact your service representative. |
| requested. | |
|
| |
7 |
| Check the server. A failure may have occurred in |
| Specified target is not present. | BMC. |
| If you do not find any problem, contact your service | |
|
| |
|
| representative. |
Errors on the Remote KVM Console
No. | Error message | Action |
1 | Failed to disable Remote KVM | Check the network environment and try again. |
| Contact your service representative if the error | |
| Console. | |
| persists. | |
|
| |
2 | Failed to enable Remote KVM | Check the network environment and try again. |
| Contact your service representative if the error | |
| Console. | |
| persists. | |
|
| |
3 | KVM packet transmission failed. | Check the network environment and server. |