Power supply units, Cooling fan unit Lock springs, AC inlets

2-16 General Description

(1)Power supply units

Power supply units supply DC power to the server.

(2)Cooling fan unit 2

(3)Lock springs

A lock spring prevents a power supply cord from disconnected from this device.

(4)AC inlets

A power cord is connected to this socket.

(5)Power supply unit LEDs

A power supply unit LED blinks in green when AC power is supplied via a power cord. When the server is powered on, the LED illuminates in green (see page 2-27).

(6)Cooling fan LEDs

A cooling fan LED illuminates in green while a cooling fan unit is working normally. If the fan unit has a problem, the LED illuminates in amber (see page 2-27).

(7)USB connectors

From left to right, USB2 and USB3. The connectors are used for connecting devices supporting the USB1.1 interface.

(8)Monitor connector

This connector is used to connect a display device

(9)Management LAN port

This is a LAN port dedicated to management and can be used when a ft remote management card is installed. The port is used when the remote management function or NEC DianaScope is used (optional for 320Fa-L, 320Fa-LR models).

(10)LAN connector 1

This connector is used to connect to a network.

(11)LAN connector 2

This connector is used to connect to a network.

(12)LINK/ACT LEDs

A LINK/ACT LED indicates the LAN access status (see page 2-27).

(13)Speed LEDs

A speed LED indicates the transfer speed of the LAN (see page 2-27).

(14)PCI-X slot #1

64 bit 100MHz 3.3V PCI-X. A PCI board of low-profile type is attached to this slot.

(15)PCI-X slot #2