NEC EXP320A, EXP320B, N8800-091F manual Post Error Messages, On-screen error message Cause Action

7-4 Troubleshooting

POST Error Messages

Powering on the server automatically starts the self-diagnostic program, POST (Power On Self-Test). When POST detects any error, it displays an error message and its measure on the display unit. Follow the table below to troubleshoot such errors.

Phoenix BIOS 4.0 Release 6.0.XXXX

:

CPU=Pentium III XXX MHz

0640K System RAM Passed

0127M Extended RAM Passed

WARNING:

02B0: Diskette drive A error.

:

press <F1> to resume, <F2> to SETUP

Message indicating a floppy disk drive error

TIPS:

For error messages on optional PCI boards, refer to the manual provided with those options.

On-screen error message		Cause	Action
0200	Failure Fixed Disk	ξ Hard disk is faulty	ξ Replace the hard disk.
		ξ CPU/IO module is faulty.	ξ Replace the CPU/IO module.
0210	Stuck Key	Keyboard connection error	ξ Disconnect the keyboard and
				connect it back again.
			ξ	Replace the keyboard.
0211 Keyboard error		Keyboard is faulty.	ξ Disconnect the keyboard and
				connect it back again.
			ξ	Replace the keyboard.
			ξ If restarting does not help,
				replace the CPU/IO module.ᴾ
0212	Keyboard Controller	Keyboard controller is faulty.	If restarting the server does not
	Failed		help, replace the CPU/IO module.
0213	Keyboard locked -	Keyboard is locked.	Unlock the key switch.
	Unlock key switch
0230	System RAM Failed at	DIMM is faulty.	ξ	Replace DIMM.
	offset		ξ Replace the CPU/IO module.
0231	Shadow RAM Failed at	Shadow RAM is faulty.	ξ	Replace DIMM.
	offset		ξ Replace the CPU/IO module.
0232	Extended RAM Failed	Extended RAM is faulty.	ξ	Replace DIMM.
at address line			ξ	Replace CPU/IO module.
0233	Memory type mixing	Memory of the different types	Memory of the different types is
	detected	is installed.	installed. Replace DIMM with
			appropriate one.
0250	System battery is dead	System battery is dead.	ξ	Replace system battery.
	-Replace and run		ξ	Replace CPU/IO module.
	SETUP