System Configuration 4-51
TIPS:
If you use SSL for access, the “Warning - Security” dialogue box(es) for server certification may be displayed for SSL in addition to the dialogue box shown above.
Logon and logout
Logon
When the logon page appears, enter the user name and password, and then click [Login].
When you login for the first time, use the following default user name and password.
Default user name: administrator
Default password: None (enter no data)
IMPORTANT:
By default, no password is set. Set your password immediately after logging on.
For security, it is recommended to change the default user name as well.
For information on settings and modification, see “BMC Configuration” described later.
When the password is authenticated, the following end user license agreement is displayed.
Read the agreement carefully.
If you can agree, click [Yes], and you can start using remote management functions. If you cannot agree, click [No]. You cannot use remote management functions.
TIPS:
If you click [Yes], you do not see this message again because the data will be stored on the management PC.
