8-32 System Upgrade
Installing ft Remote Management Card
Follow the procedures below and install ft Remote Management Card.
1.Remove CPU/IO module referring page
TIPS:
If PCI board is already installed to the CPU/IO module, remove the PCI board referring to page
2.Remove PCI rear bracket installed to the CPU/IO module as a standard with two screws.
PCI rear bracket
3.Remove the blank cover for LAN connector of ft Remote Management Card. Grab the top and bottom of the blank cover to unlock and remove it.
Blank cover for LAN connector
4.Install ft Remote Management Card to PCI rear bracket with one screw.
ft Remote Management Card
