3-6 Linux Setup and Operation
4 Remove Full Disks
5 Status(Raid)
6 Status(All Disks)
9 <= Return
Command:2
[Remove Half Disk] Which scsi
mdadm: set /dev/hadb2 faulty in /dev/md1
mdadm: hot removed /dev/hadb2
mdadm: set /dev/hadb3 faulty in /dev/md2
mdadm: hot removed /dev/hadb3
mdadm: set /dev/hadb1 faulty in /dev/md0
mdadm: hot removed /dev/hadb1
Command Action
1 New Disks
2 Remove Half Disk
3 Repair Disk
4 Remove Full Disks
5 Status(Raid)
6 Status(All Disks)
9 <= Return
Command:5 | <<<Confirm that the disk is disconnected from RAID>>> | |||
[Status(Raid)] | Status | Member | ||
Name | Partition | |||
md1 | / | simplex | (0)hada2 | |
md2 | /boot | simplex | (0)hada3 | |
md0 | simplex | (0)hada1 | ||
Command Action |
|
| ||
1 | New Disks |
|
| |
2 | Remove Half Disk |
| ||
3 | Repair Disk |
|
| |
4 | Remove Full Disks |
| ||
5 | Status(Raid) |
| ||
6 | Status(All Disks) |
| ||
9 | <= Return |
|
| |
Command:9
(Disconnecting a disk from the system and adding a new disk)
Command Action
1 => RAID
2 => SCSI
9Quit
Command:2
Command Action
