4-12 System Configuration
Advanced
Move the cursor onto "Advanced" to display the Advanced menu.
There is no configurable item on the Advanced menu screen below. Display each sub menu and make settings on the sub menu screen. Select an option with the "Ź" mark and press Enter to display its submenu.
See the table below for setup options on the screen.
Option | Parameter | Description | Your Setting | |
[Disabled] | Specify whether to display the Power On |
|
| |
Diagnostic Screen | Enabled |
|
| |
|
| "Disabled" is selected, the NEC logo |
|
|
|
| appears while POST is in progress. (To |
|
|
|
| display POST check results, press Esc and |
|
|
|
| F2.) |
|
|
|
| If "Console Redirection” is set to "Enabled,” |
|
|
|
| this option is unconditionally set to |
|
|
|
| "Enabled.” |
|
|
Reset | [No] | If you select [Yes], the system configuration |
|
|
Configuration Date | Yes | data will be cleared at next boot with this |
|
|
|
| option set automatically to [No]. |
|
|
NumLock | On | Specify whether or not to enable NumLock |
|
|
| [Off] | at system startup. |
|
|
|
| [ | ]: |
|