NEC EXP320A, EXP320B, N8800-091F, N8800-090F manual Asyn

4-34 System Configuration

The following table provides information on options and their functions on the menu.

Option	Parameter		Description
Sync Transfer Rate	[320]	33.3	Typically, set “320.” This value may need to be
(MB/Sec)	160	20.0	changed depending on the option connected. For
	80.0	10.0	more information, see the manual attached to the
	66.6	ASYN	option.
	40.0
Packetized	[Yes]		Select whether or not to optimize the bus usage
	No		ratio by using the function to transfer packetized
			data (DT or dual transition).
QAS	[Yes]		Select whether or not to use the Quick Arbitration
	No		and Selection(QAS) function, which improves the
			SCSI bus usage ratio
Initiate Wide Negotiation	[Yes]		If the connected SCSI device supports Wide
	No		SCSI, select “Yes.” If not, select “No.”
Enable Disconnection	[Yes]		Set “Yes.”
	No
Send Start Unit Command	[Yes]		Set “Yes” for a hard disk drive. Otherwise set
	No		“No.”
BIOS Multiple LUN Support	Yes		Set “No.”
	[No]
Include in BIOS Scan	[Yes]		Set “Yes.”
	No
			[ ]: Factory-set