|
|
|
| Troubleshooting |
|
|
|
| |
|
| Cause | Action | |
| 0B9C BMC internal | BMC device is faulty. | Replace the CPU/IO module or ft | |
| exception |
|
| Remote Management Card |
| 0B9D BMC A/D timeout error |
|
| (option). |
| 0B9E SDR repository corrupt | SDR data is faulty. | If updating SDR does not help, | |
|
|
|
| replace the CPU/IO module or ft |
|
|
|
| Remote Management Card |
|
|
|
| (option). |
| 0B9F SEL corrupt | SEL repository within BMC is | Replace the CPU/IO module or ft | |
|
| faulty. | Remote Management Card | |
|
|
|
| (option). |
| 0BA0 SDR/PIA mismatched. | SDR and PIA data do not | If updating SDR/PIA does not | |
| SDR, PIA must be | match. | help, replace CPU/IO module or ft | |
| updated. |
|
| Remote Management Card |
|
|
|
| (option). |
| 0BB0 SMBIOS - SROM data | ξ | I2C bus is faulty. | If turning AC power off and on |
| read error | ξ | SROM is faulty. | does not help, replace the |
|
| ξ | BMC is faulty. | CPU/IO module. |
| 0BB1 SMBIOS - SROM data | Data within SROM is faulty. |
| |
| checksum bad |
|
|
|
| 0BC0 POST detected startup | CPU is faulty. | Replace the CPU. | |
| failure of 1st Processor |
|
|
|
| 0BC1 POST detected startup |
|
|
|
| failure of 2nd |
|
|
|
| Processor |
|
|
|
| 8120 Unsupported DIMM | Unsupported DIMM is | Check supported DIMMs and | |
| detected in DIMM | mounted. | replace the DIMM. If replacing the | |
| group #1 |
|
| DIMM does not help, replace the |
| 8121 Unsupported DIMM |
|
| CPU/IO module. |
| detected in DIMM group # |
|
|
|
| 8122 Unsupported DIMM |
|
|
|
| detected in DIMM group |
|
|
|
| #3 |
|
|
|
| 8130 Mismatch DIMM detected | DIMM group do not match. |
| |
| in DIMM group#1 |
|
|
|
| 8131 Mismatch DIMM detected |
|
|
|
| in DIMM group#2 |
|
|
|
| 8132 Mismatch DIMM detected |
|
|
|
| in DIMM group#3 |
|
|
|
| 8150 NVRAM Cleared By | CMOS clear jumper is | Turn off the DC power and | |
| Jumper | mounted. | change back the jumper setting. | |
| 8151 Password Cleared By | Password clear jumper is |
| |
| Jumper | mounted. |
| |
| 8160 Mismatch Processor | CPU frequency does not | Check supported CPUs and | |
| Speed detected on | match. | replace the CPU. If replacing the | |
| Processor 1 |
|
| CPU does not help, replace |
| 8161 Mismatch Processor |
|
| CPU/IO module. |
| Speed detected on |
|
|
|
| Processor 2 |
|
|
|
| 8170 Processor 1 not | CPU frequency is incorrect. |
| |
| operating at intended |
|
|
|
| frequency. |
|
|
|
|
|
|
|
|
