CK Electric Part C3000 Receiving Documents Automatically-Fax Only Mode, How Fax/Tel Mode Works

Receiving Documents Automatically—Fax Only Mode

When you set up the MultiPASS C3000 for a dedicated fax line, the unit automatically receives the document whenever a call comes over the fax line. It disconnects any calls that are not from a fax machine.

Receiving Both Documents and Telephone Calls Automatically—Fax/Tel Mode

In Fax/Tel Mode, the MultiPASS C3000 monitors all incoming calls over the telephone line. When the MultiPASS C3000 receives an incoming call, it checks to see if the call is from another fax machine trying to send a document or from someone wanting to talk to you. You must have a telephone connected to the MultiPASS C3000 to use this mode.

	How Fax/Tel Mode Works
	In Fax/Tel Mode, the MultiPASS C3000 does not ring when it receives
	a call from another fax machine that is trying to send a document.
	This is so that you are not disturbed when your MultiPASS C3000 is
	communicating with another fax machine. The unit automatically
	receives the document.
	If the call is from a person, the MultiPASS C3000 rings to alert you to
	pick up the phone. You must pick up the telephone connected to the
	MultiPASS C3000.
	If you do not pick up the telephone connected to the MultiPASS C3000
	within 15 seconds (set by the Ring Time option), the unit stops ringing.
	It checks again to make sure the call is not from a fax machine and then
	hangs up.
N
	The MultiPASS C3000 does not recognize an extension telephone
	connected to another phone jack (that is, not connected to the
	MultiPASS C3000).
	If a call comes in and you pick up an extension phone, the MultiPASS
	C3000 will continue to ring for 15 seconds, check for a fax, and then
	hang up.

5-2 Receiving Faxes Chapter 5