NETGEAR 7300 Series Radius server timeout, Show accounting, No radius server retransmit

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Format	radius	server	retransmit <retries>
Mode	Global	Config

no radius server retransmit

This command sets the maximum number of times a request packet is re-transmitted, when no response is received from the RADIUS server, to the default value, i.e. 10.

Format	no radius server retransmit
Mode	Global Config

radius server timeout

This command sets the timeout value (in seconds) after which a request must be retransmitted to the RADIUS server if no response is received. The timeout value is an integer in the range of 1 to 30.

Default	6
Format	radius server timeout <seconds>
Mode	Global Config
no radius server timeout

This command sets the timeout value (in seconds) after which a request must be retransmitted to the RADIUS server if no response is received, to the default value, i.e. 6.

Format	no radius server timeout
Mode	Global Config

show accounting

This command is used to display the configured RADIUS accounting mode, accounting server and the statistics for the configured accounting server.

Format	show accounting [statistics <ipaddr>]
Mode	Privileged EXEC

If the optional token 'statistics <ipaddr>' is not included, then only the accounting mode and the RADIUS accounting server details are displayed.

8-104 Switching Commands

202-10009-01_060204