NETGEAR 7300 Series user manual Show gvrp configuration, Port Gmrp Mode, Port Gvrp Mode

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

	Port, per-GARP participant basis. The Leave All Period Timer is
	set to a random value in the range of LeaveAllTime to
	1.5*LeaveAllTime. Permissible values are 200 to 6000 centisec-
	onds (2 to 60 seconds). The factory default is 1000 centiseconds
	(10 seconds). The finest granularity of specification is 1 centisec-
	ond (0.01 seconds).
Port GMRP Mode	Indicates the GMRP administrative mode for the port. It may be
	enabled or disabled. If this parameter is disabled, Join Time,
	Leave Time and Leave All Time have no effect. The factory
	default is disabled.
Port GVRP Mode	Indicates the GVRP administrative mode for the port. It may be
	enabled or disabled. If this parameter is disabled, Join Time,
	Leave Time and Leave All Time have no effect. The factory
	default is disabled.

show gvrp configuration

This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces.

Format show gvrp configuration {<slot/port> all}

Mode Privileged EXEC and User EXEC

Interface	This displays the slot/port of the interface that this row in the
	table describes.
Join Timer	Specifies the interval between the transmission of GARP PDUs
	registering (or re-registering) membership for an attribute. Cur-
	rent attributes are a VLAN or multicast group. There is an
	instance of this timer on a per-Port, per-GARP participant basis.
	Permissible values are 10 to 100 centiseconds (0.1 to 1.0 sec-
	onds). The factory default is 20 centiseconds (0.2 seconds). The
	finest granularity of specification is 1 centisecond (0.01 seconds).
Leave Timer	Specifies the period of time to wait after receiving an unregister
	request for an attribute before deleting the attribute. Current
	attributes are a VLAN or multicast group. This may be consid-
	ered a buffer time for another station to assert registration for the
	same attribute in order to maintain uninterrupted service. There is
	an instance of this timer on a per-Port, per-GARP participant
	basis. Permissible values are 20 to 600 centiseconds (0.2 to 6.0
Switching Commands	8-55

202-10009-01_060204