
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Default | The base MAC address displayed using hexadecimal notation as |
| specified in IEEE 802 standard. |
Format | |
Mode | Global Config |
no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format | no |
Mode | Global Config |
spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the configuration that this switch is currently using. The Configuration Identifier Revision Level is a number in the range of 0 to 65535.
Default | 0 |
Format | |
Mode | Global Config |
no spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the configuration that this switch is currently using to the default value, i.e. 0.
Format | no |
Mode | Global Config |
spanning-tree edgeport
This command specifies that this port is an Edge Port within the common and internal spanning tree. This will allow this port to transition to Forwarding State without delay.
Format | |
Mode | Interface Config |
Switching Commands |