User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Mode

Global Config

set garp timer leaveall

This command sets how frequently Leave All PDUs are generated per port. A Leave All PDU indicates that all registrations will be unregistered. Participants would need to rejoin in order to maintain registration. The value applies per port and per GARP participation. The time may range from 200 to 6000 (centiseconds).

Note: This command has an effect only when GVRP is enabled.

Default

1000 centiseconds (10 seconds)

Format

set garp timer leaveall <200-6000>

Mode

Interface Config

no set garp timer leaveall

 

This command sets how frequently Leave All PDUs are generated per port to 1000 centiseconds (10 seconds).

Note: This command has an effect only when GVRP is enabled.

Format

no set garp timer leaveall

Mode

Interface Config

set garp timer leaveall all

This command sets how frequently Leave All PDUs are generated for all ports. A Leave All PDU indicates that all registrations will be unregistered. Participants would need to rejoin in order to maintain registration. The value applies per port and per GARP participation. The time may range from 200 to 6000 (centiseconds).

Note: This command has an effect only when GVRP is enabled.

Default 1000 centiseconds (10 seconds)

Format

set garp timer leaveall all <200-6000>

Mode

Global Config

Switching Commands

8-47

202-10009-01_060204

Page 113
Image 113
NETGEAR 7300 Series user manual Set garp timer leaveall all, No set garp timer leaveall