NETGEAR 7300 Series Area authentication, Area default-cost, Area nssa, No area authentication

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

area authentication

This command specifies the authentication type to be used for the specified area id.

Default	none
Format	area <areaid> authentication {none simple encrypt}
Mode	Router OSPF Config
no area authentication

This command sets the default authentication type to be used for the specified area id.

Format	no area <areaid> authentication
Mode	Router OSPF Config

area default-cost

This command configures the monetary default cost for the stub area. The operator must specify the area id and an integer value between 1-16777215.

Format	area <areaid> default-cost <1-16777215>
Mode	Router OSPF Config

area nssa

This command configures the specified areaid to function as an NSSA.

Format	area <areaid> nssa
Mode	Router OSPF Config
no area nssa

This command disables nssa from the specified area id.

Format	no area <areaid> nssa
Mode	Router OSPF Config

9-2 Routing Commands

202-10009-01_060204