NETGEAR 7300 Series user manual Clear vlan, Copy

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

clear vlan

This command resets VLAN configuration parameters to the factory defaults.

Format	clear vlan
Mode	Privileged	EXEC

copy

This command uploads and downloads to/from the switch. Local URLs can be specified using tftp or xmodem. The following can be specified as the source file for uploading from the switch: startup config (nvram:startup-config), error log (nvram:errorlog), message log (nvram:msglog) and trap log (nvram:traplog). A URL is specified for the destination.

The command can also be used to download the startup config or code image by specifying the source as a URL and destination as nvram:startup-configor .system:image respectively.

The command can be used to the save the running config to nvram by specifying the source as system:running-configand the destination as nvram:startup-config

The command can also be used to download ssh key files as nvram:sshkey-rsa, nvram:sshkey-rsa2, and nvram:sshkey-dsa and http secure-server certificates as nvram:sslpem-root, nvram:sslpem- server, nvram:sslpem-dhweak, and nvram:sslpem-dhstrong.

Default	none
Format	copy nvram:startup-config <url>
	copy nvram:errorlog <url>
	copy nvram:msglog <url>
	copy nvram:traplog <url>
	copy <url> nvram:startup-config
	copy <url> system:image
	copy system:running-config nvram:startup-config
	copy <url> nvram:sslpem-root
	copy <url> nvram:sslpem-server
	copy <url> nvram:sslpem-dhweak
	copy <url> nvram:sslpem-dhstrong
	copy <url> nvram:sshkey-rsa1
	copy <url> nvram:sshkey-rsa2
8-114	Switching Commands

202-10009-01_060204