
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
ip route
This command configures a static route. The <networkaddr> and <nexthopip> are valid ip addresses. The <subnetmask> is a valid subnet mask. The [metric] parameter is an integer value from 0 to 255. The default value is 1.
Format | ip route <networkaddr> <subnetmask> <nexthopip> [met- |
| ric] |
Mode | Global Config |
no ip route |
|
This command causes a static route to be deleted. The <networkaddr> and <nexthopip> are valid IP address. The <subnetmask> is a
Format | no ip route <networkaddr> <subnetmask> <nexthopip> |
ip route default
This command configures the default route. The value for <nexthopip> is a valid IP address of the next hop router.
Format | ip route default <nexthopip> |
Mode | Global Config |
no ip route default |
|
This command causes the static default route to be deleted.
Format | no ip route default |
Mode | Global Config |
ip route distance
This command sets the static route preference value in the router. Lower route preference values are preferred when determining the best route.
Default | 60 |
Format | ip route distance |
|
|
Routing Commands |