
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
no distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Format | no |
Mode | connected} |
Router OSPF Config |
distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Default | 0 |
Format | |
Mode | connected} |
Router RIP Config | |
no |
|
This command is used to specify the access list to filter routes received from the source protocol.
Format | no | |
Mode | connected} |
|
Router RIP | Config |
no default-information originate
This command is used to control the advertisement of default routes.
Format | no |
Mode | Router RIP Config |
encapsulation
This command configures the link layer encapsulation type for the packet. Acceptable values for <encapstype> are Ethernet and SNAP. The default is Ethernet.
Format | encapsulation {ethernet snap} |
Mode | Interface Config |
|
|
Routing Commands |