
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Broadcast Packets Transmitted - The total number of packets that
Transmit Errors
Total Errors - The sum of Single, Multiple, and Excessive Colli- sions.
Tx FCS Errors - The total number of packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame Check Sequence (FCS) with an integral number of octets
Oversized - The total number of frames that exceeded the max permitted frame size. This counter has a max increment rate of 815 counts per sec. at 10 Mb/s.
Underrun Errors - The total number of frames discarded because the transmit FIFO buffer became empty during frame transmission.
Transmit Discards
Total Discards - The sum of single collision frames discarded, multiple collision frames discarded, and excessive frames dis- carded.
Single Collision Frames - A count of the number of successfully transmitted frames on a particular interface for which transmis- sion is inhibited by exactly one collision.
Multiple Collision Frames - A count of the number of success- fully transmitted frames on a particular interface for which trans- mission is inhibited by more than one collision.
Excessive Collisions - A count of frames for which transmission on a particular interface fails due to excessive collisions.
Port Membership - The number of frames discarded on egress for this port due to egress filtering being enabled.
VLAN Viable Discards - The number of frames discarded on this port when a lookup on a particular VLAN occurs while that entry in the VLAN table is being modified, or if the VLAN has not been configured.
Protocol Statistics
BPDU's received - The count of BPDU's (Bridge Protocol Data
Units) received in the spanning tree layer.
Switching Commands |