NETGEAR 7300 Series user manual Ip rip authentication, No ip rip authentication

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

ip rip

This command enables RIP on a router interface.

Default	Disabled
Format	ip rip
Mode	Interface Config
no ip rip

This command disables RIP on a router interface.

Format	no ip rip
Mode	Interface	Config

ip rip authentication

This command sets the RIP Version 2 Authentication Type and Key for the specified interface. The value of <type> is either none, simple, or encrypt.

The value for authentication key [key] must be 16 bytes or less. The [key] is composed of standard displayable, non-control keystrokes from a Standard 101/102-key keyboard. If the value of <type> is encrypt, a keyid in the range of 0 and 255 must be specified.

Default	The default authentication type is none.
Default	The default password key is an empty string. Unauthenticated
	interfaces do not need an authentication key.
Default	The default key id is not defined. Unauthenticated interfaces do
	not need an authentication key id.
Format	ip rip authentication {none {simple <key>}
Mode	{encrypt <key> <keyid>}}
	Interface Config
no ip rip authentication

This command sets the default RIP Version 2 Authentication Type.

Format	no ip rip	authentication
Mode	Interface	Config
Routing Commands		9-29

202-10009-01_060204