NETGEAR 7300 Series user manual Shutdown all, Snmp trap link-status, No shutdown all

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Mode	Interface	Config
no shutdown
This command enables a port.
Format	no shutdown
Mode	Interface	Config

shutdown all

This command disables all ports.

Default	Enabled
Format	shutdown all
Mode	Global Config
no shutdown all

This command enables all ports.

Format	no shutdown all
Mode	Global Config

snmp trap link-status

This command enables link status traps by interface.

Note: This command is valid only when the Link Up/Down Flag is enabled. See ‘snmp-server enable traps linkmode’ command.

Format	snmp trap	link-status
Mode	Interface	Config
no snmp trap link-status

This command disables link status traps by interface.

Note: This command is valid only when the Link Up/Down Flag is enabled. See ‘snmp-server enable traps linkmode’ command).

Format	no snmp trap link-status
8-66	Switching Commands

202-10009-01_060204