User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

no spanning-tree edgeport

This command specifies that this port is not an Edge Port within the common and internal spanning tree.

Format

no spanning-tree edgeport

Mode

Interface Config

spanning-tree forceversion

This command sets the Force Protocol Version parameter to a new value. The Force Protocol Version can be one of the following:

802.1d - ST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1d functionality supported)

802.1w - RST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1w functionality supported)

802.1s - MST BPDUs are transmitted (IEEE 802.1s functionality supported)

Default

802.1s

Format

spanning-tree forceversion <802.1d 802.1w 802.1s>

Mode

Global Config

no spanning-tree forceversion

This command sets the Force Protocol Version parameter to the default value, i.e. 802.1s.

Format

no spanning-tree forceversion

Mode

Global Config

spanning-tree forward-time

This command sets the Bridge Forward Delay parameter to a new value for the common and internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the value being greater than or equal to "(Bridge Max Age / 2) + 1".

Default

15

Format

spanning-tree forward-time <4-30>

Mode

Global Config

 

 

Switching Commands

8-85

202-10009-01_060204

Page 151
Image 151
NETGEAR 7300 Series user manual Spanning-tree forceversion, Spanning-tree forward-time, No spanning-tree edgeport