Switching Commands
no bridge aging-time
This command sets the forwarding database address aging timeout to 300 seconds. In an IVL system, the [fdbid/all] parameter is required. In an SVL system, the [fdbid/all] parameter is not used and will be ignored if entered.
Fdbid (Forwarding database ID) indicates which forwarding database's aging timeout is being configured. All is used to con- figure all forwarding database's agetime. In an SVL system, the [fdbid/all] parameter is not used and will be ignored if entered.
Forwarding Database ID
300
bridge aging-time <10-1,000,000> [fdbid all] Global Config
The <seconds> parameter must be within the range of 10 to 1,000,000 seconds.
Default Format Mode Seconds
.
Management Commands
These commands manage the switch and show current management settings.
bridge aging-time
This command configures the forwarding database address aging timeout in seconds. In an IVL system, the [fdbid/all] parameter is required. In an SVL system, the [fdbid/all] parameter is not used and will be ignored if entered.
This field lists the ports that are actively participating in this port- channel.
Active Ports
This field lists the ports that are members of this port-channel, in slot/port notation.
This field indicates whether the link is up or down.
This field displays the name of the port-channel.
For each port-channel the following information is displayed: Name
Link State
Mbr Ports
This field displays whether or not the device has static capability enabled.
Static Capability
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
