User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

no port lacpmode all

This command disables Link Aggregation Control Protocol (LACP) on all ports.

Format

no port lacpmode all

Mode

Global Config

port-channel

This command configures a new port-channel (LAG) and generates a logical slot and port number for it. Display this number using the “show port-channel”.

Note: Before including a port in a port-channel, set the port physical mode. See ‘speed’ command.

Format

port-channel <name>

Mode

Global Config

port-channel adminmode

This command enables a port-channel (LAG). The interface is a logical slot and port for a configured port-channel. The option all sets every configured port-channel with the same administrative mode setting.

Format

port-channel adminmode {<logical slot/port> all}

Mode

Global Config

no port-channel adminmode

This command disables a port-channel (LAG). The interface is a logical slot and port for a configured port-channel. The option all sets every configured port-channel with the same administrative mode setting.

Format

no port-channel adminmode {<logical slot/port> all}

Mode

Global Config

port-channel linktrap

This command enables link trap notifications for the port-channel (LAG). The interface is a logical slot and port for a configured port-channel. The option all sets every configured port-channel with the same administrative mode setting.

8-42

Switching Commands

202-10009-01_060204

Page 108
Image 108
NETGEAR 7300 Series Port-channel adminmode, Port-channel linktrap, No port lacpmode all, No port-channel adminmode