User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Primary Server IP Address Indicates the configured server currently in use for authenti- cation

Number of configured servers The configured IP address of the authentication server

Max number of retransmits The configured value of the maximum number of times a request packet is retransmitted

Timeout Duration

The configured timeout value, in seconds, for request re-trans-

 

missions

Accounting Mode

Yes or No

If the optional token 'servers' is included, the following information regarding the configured RADIUS servers is displayed.

IP Address

IP Address of the configured RADIUS server

Port

The port in use by this server

Type

Primary or secondary

Secret Configured

Yes / No

show radius statistics

This command is used to display the statistics for RADIUS or configured server. To show the confifured RADIUS server statistic, the IP Address specified must match that of a previously configured RADIUS server. On execution, the following fields are displayed.

Format

show radius statistics [ipaddr]

Mode

Privileged EXEC

If ip address is not specified than only Invalis Server Address filed is displayed. Otherwise other listed fields are displayed.

Invalid Server Addresses The number of RADIUS Access-Response packets received from unknown addresses.

Server IP Address

Round Trip Time The time interval, in hundredths of a second, between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from the RADIUS authentication server.

Access Requests The number of RADIUS Access-Request packets sent to this server. This number does not include retransmissions.

8-110

Switching Commands

202-10009-01_060204

Page 176
Image 176
NETGEAR 7300 Series user manual Show radius statistics, Timeout Duration, Accounting Mode, Server IP Address