
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
RIP Admin Mode | RIP administrative mode of router RIP operation; enable acti- |
| vates and disable |
| is a configured value. |
Global Route Changes | The number of route changes made by RIP to the IP Route Data- |
| base. |
Global queries The number of responses sent to RIP queries from other systems. | |
| Source protocol/routes that are being redistributed. |
Source | Source protocol/routes that are being redistributed. |
| Metric of the routes being redistributed. |
| The criteria by which OSPF routes are redistributed into other |
| routing domains. |
| TAccess list used to filter redistributed routes. |
| Indicates whether the default routes received from other source |
| protocols are advertised or not |
show ip rip interface brief
This command displays general information for each RIP interface. For this command to display successful results routing must be enable per interface (i.e. config router rip interface <slot/port> enable).
Format | show ip rip interface brief |
Mode | Privileged EXEC and User EXEC |
Slot/Port | Is the unit slot/port identifying each interface. |
IP Address | The IP source address used by the specified RIP interface. |
Send Version | The RIP version(s) used when sending updates on the specified |
| interface. The types are none, |
Receive Version | The RIP version(s) allowed when receiving updates from the |
| specified interface. The types are none, |
RIP Mode | RIP administrative mode of router RIP operation; enable acti- |
| vates, disable |
Link State | The mode of the interface (up or down). |
Routing Commands |