User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

ip ospf retransmit-interval

This command sets the OSPF retransmit Interval for the specified interface.

The value for <seconds> is the number of seconds between link-state advertisement retransmissions for adjacencies belonging to this router interface. This value is also used when retransmitting database desctions and link-state request packets.

Valid values range from 0 to 3600 (1 hour).

Default

5

Format

ip ospf retransmit-interval <0-3600>

Mode

Interface Config

no ip ospf retransmit-interval

This command sets the default OSPF retransmit Interval for the specified interface.

Format

no ip ospf retransmit-interval

Mode

Interface Config

ip ospf transmit-delay

This command sets the OSPF Transit Delay for the specified interface. In addition, it sets the estimated number of seconds it takes to transmit a link state update packet over this interface.

Valid values for <seconds> range from 1 to 3600 (1 hour).

Default

1

Format

ip ospf transmit-delay <1-3600>

Mode

Interface Config

no ip ospf transmit-delay

 

This command sets the default OSPF Transit Delay for the specified interface.

Format

no ip ospf transmit-delay

Mode

Interface Config

9-28

Routing Commands

202-10009-01_060204

Page 210
Image 210
NETGEAR 7300 Series user manual Ip ospf retransmit-interval, Ip ospf transmit-delay, No ip ospf retransmit-interval