
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Restrictions | Routed frames are always Ethernet encapsulated when a frame is |
| routed to a VLAN. |
exit-overflow-interval
This command configures the exit overflow interval for OSPF. It describes the number of seconds after entering Overflow state that a router will wait before attempting to leave the Overflow State. This allows the router to again originate
Default | 0 |
Format | |
Mode | Router OSPF Config |
no |
|
This command configures the default exit overflow interval for OSPF.
Format | no |
Mode | Router OSPF Config |
external-lsdb-limit
This command configures the external LSDB limit for OSPF. If the value is
Default | |
Format | |
Mode | Router OSPF Config |
no |
|
This command configures the default external LSDB limit for OSPF.
Format | no |
Mode | Router OSPF Config |
|
|
Routing Commands |