User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Format

no network

javamode

Mode

Privileged

EXEC

network mac-address

This command sets locally administered MAC addresses. The following rules apply:

Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally administered (b'0') or locally administered (b'1').

Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an individual address (b'0') or a group address (b'1').

The second character, of the twelve character macaddr, must be 2, 6, A or E.

A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').

Format

network mac-address <macaddr>

Mode

Privileged EXEC

network mac-type

This command specifies whether the burned in MAC address or the locally-administered MAC address is used.

Default

burnedin

Format

network mac-type {local burnedin}

Mode

Privileged EXEC

no network mac-type

 

This command resets the value of MAC address to its default.

Format

no network

mac-type

Mode

Privileged

EXEC

network parms

This command sets the IP Address, subnet mask and gateway of the router. The IP Address and the gateway must be on the same subnet.

Format

network parms <ipaddr> <netmask> [<gateway>]

 

 

8-20

Switching Commands

202-10009-01_060204

Page 86
Image 86
NETGEAR 7300 Series user manual Network mac-address, Network mac-type, Network parms, No network mac-type