OPERATING INSTRUCTIONS

Open the door.￿

Load clothes loosely into the drum.￿

Load sheets first,starting with one corner.￿

Close the door.￿

Dry your hands.￿

Plug in the machine.￿

Select the final Dry Cycle (see program chart ￿ on control panel for recommendations).￿

Press Start. The drum begins rotating in a ￿ counter-clockwise direction. (If the machine has no ￿ load in the drum, it turns off automatically after approximately 40 seconds.)￿

The drum will now begin to rotate and will stop ￿ automatically when your clothes are dry.The drum ￿ pauses and rotates in the other direction every few ￿ minutes.

If a load is checked mid-cycle, restart the appliance by￿ closing the door and pressing the start button. When ￿ drying large items such as sheets, we suggest you￿ periodically stop the dryer to re-distribute the load.￿ ￿

When drying mixed loads, the dryer may stop when￿ the lighter items are dry. These should be removed and￿ the dryer restarted to allow the heavier items to ￿ continue drying.￿

There is an automatic 12 minute cool down period at￿ the end of every cycle, during which the heater turns off.￿

￿

The dryer then automatically performs an anticrease cycle to minimize creasing. In this cycle, the dryer tumbles every few minutes.

Tumble drying beneficial

Do not tumble dry

Dry flat

THINGS TO AVOID

- Do not overload the dryer ￿

-Avoid drying large articles alone as they tend to ￿ bundle up, increasing the drying time.￿

￿

-Do not dry wollen or wool mixture articles unless￿ the article is labelled suitable.￿

￿

-Do not allow exhaust hose or lint filter to become￿ clogged with lint.

-Do not allow lint to accumulate around the dryer.

TROUBLESHOOTING

If the clothes are not dry after normal drying time:￿

￿

• Make sure the lint filter is clean.￿

￿

Check that you have used the corrrect program￿ settings.￿

￿

• Make sure the exhaust hose is not blocked.

Important note: The dryer is fitted with a reset safety￿ switch. A "red push button" is located near the top right at the back of the dryer (fig 6). To check if the ￿ switch has tripped, remove switch cover, press the red￿ button lightly. If the switch has tripped, a sharp "click"￿ will be heard. This safety switch operates (trips) only￿ when the airflow is severely restricted,so it is ￿ imperative that the filter be kept clean.

 

TECHNICAL DATA

• Electrical:

220/240 Volts - 15 Amps￿

￿

 

Heating element: 2,500 Watts￿

￿

• Drum capacity:

11 lb (5kg)￿

￿

 

• Overall dimensions￿

 

- Height:

33.5"(85cm) ￿

- Width:

23.4"(59.5cm)￿

- Depth:

20.8"(53cm)￿

￿

 

• Net weight:

68.1lb (31kg)￿

￿

 

• Energy Factor:

2.93 lb/kWh (1.33 kg/kWh)￿

NOTE: A stacking kit is available for this dryer.

RED PUSH BUTTON

SWITCH￿

COVER

5

Page 6
Image 6
Equator CL 837 V manual Operating Instructions, Things to Avoid, Troubleshooting, Technical Data