Wall Insert or Recessed Installation

7.1Warning! To reduce the risk of fire, this appliance must be exhausted outdoors.

7.2Minimum clearances between the dryer cabinet and adjacent walls or other surfaces are:

Sides	0"	(0 cm)
Front & Rear	3"	(7.6 cm)

7.3Make sure that the air inlets at the back are not blocked and do not allow fluff/lint to accumulate around the dryer

CONTROL PANEL FEATURES

To start the drying cycle

B. DRY Choose the final dryness of the

PROGRAMS: load by selecting the desired program (see program chart)

Note:

The use of a ready-to-iron program will use

A B30% less energy than a ready-to-wear

program.

PROGRAM CHART