NETGEAR 7300 Series user manual Global No snmp-server enable traps Config Multiusers

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Table 13-2.	IS CLI Mapping (continued)
Package	7300 Series L3 Switch Command	CLI Command
		Mode	Syntax
		Global	no snmp-server enable traps
		Config	multiusers
Switching	config trapflags stpmode <enable	Global	snmp-server enable traps stpmode
	disable>	Config
		Global	no snmp-server enable traps
		Config	stpmode
Switching	config telnet maxsessions <0-5>	Privileged	remotecon maxsessions <0-5>
		EXEC
		Privileged	no remotecon maxsessions
		EXEC
Switching	config telnet mode <enable	Privileged	telnet
	disable>	EXEC
		Privileged	no telnet
		EXEC
Switching	config telnet timeout <0-160>	Privileged	remnotecon timeout <0-160>
		EXEC
		Privileged	no remotecon timeout
		EXEC
Switching	config forwardingdb agetime	Global	bridge aging-time <10-1000000>
	<10-1,000,000> [fdbid/all]	Config	{<1-4094> all}
		Global	no bridge aging-time {<1-4094> all}
		Config
Switching	show spanningtree summary	Privileged	show spanning-tree summary
		EXEC and
		User
		EXEC
Switching	show spanningtree port <slot/port>	Privileged	show spanning-tree interface <slot/
		EXEC and	port>
		User
		EXEC

A-26 IS CLI Mapping

202-10009-01_060204