User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

ip vrrp ip

This command sets the ipaddress value for a virtual router. The value for <ipaddr> is the IP Address which is to be configured on that interface for VRRP. The parameter <vrID> is the virtual router ID which has an integer value range from 1 to 255.

Default

There is no default value for ipaddress.

Format

ip vrrp <vrID> ip <ipaddr>

Mode

Interface Config

ip vrrp preempt

This command sets the preemption mode value for the virtual router configured on a specified interface. The parameter <vrID> is the virtual router ID which has an integer value range from 1 to 255

Default

Enabled

Format

ip vrrp <vrID> preempt

Mode

Interface Config

no ip vrrp preempt

 

This command sets the default preemption mode value for the virtual router configured on a specified interface.

Default

Enabled

Format

no ip vrrp <vrID> preempt

Mode

Interface Config

ip vrrp priority

This command sets the priority value for the virtual router configured on a specified interface. The priority of the interface is a priority integer from 1 to 254. The parameter <vrID> is the virtual router ID which has an integer value ranges from 1 to 255.

Default

100

Format

ip vrrp <vrID> priority <1-254>

Mode

Interface Config

 

 

Routing Commands

9-59

202-10009-01_060204

Page 241
Image 241
NETGEAR 7300 Series user manual Ip vrrp ip, Ip vrrp preempt, Ip vrrp priority, No ip vrrp preempt