User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

no arp dynamicrenew

This command disables ARP component from automatically renewing ARP entries of type dynamic when they age out.

Format

no arp dynamicrenew

Mode

Privileged Exec

arp purge

This command causes the specified IP address to be removed from the ARP cache. Only entries of type dynamic or gateway are affected by this command.

Format

arp purge <ipaddr>

Mode

Privileged EXEC

arp resptime

This command configures the ARP request response timeout.

The value for <seconds> is a valid positive integer, which represents the IP ARP entry response timeout time in seconds. The range for <seconds> is between 1-10 seconds.

Default

l

Format

arp resptime <1-10>

Mode

Global Config

no arp resptime

 

This command configures the default ARP request response timeout.

Format

no arp

resptime

Mode

Global

Config

arp retries

This command configures the ARP count of maximum request for retries.

The value for <retries> is an integer, which represents the maximum number of request for retries. The range for <retries> is an integer between 0-10 retries.

9-10

Routing Commands

202-10009-01_060204

Page 192
Image 192
NETGEAR 7300 Series user manual Arp purge, Arp resptime, Arp retries, No arp dynamicrenew, No arp resptime