User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

hostroutesaccept

This command enables the RIP hostroutesaccept mode.

Default

Enabled

Format

hostroutesaccept

Mode

Router RIP Config

no hostroutesaccept

 

This command disables the RIP hostroutesaccept mode.

Format

no hostroutesaccept

Mode

Router RIP Config

ip address

This command configures an IP address on an interface.

The value for <ipaddr> is the IP Address of the interface.

The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask of the interface. This changes the label "IP address" in "show ip interface."

Format

ip address <ipaddr> <subnetmask>

Mode

Interface Config

no ip address

 

This command deletes an IP address from an interface.

The value for <ipaddr> is the IP Address of the interface.

The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask of the interface.

Format

no ip address <ipaddr> <subnetmask>

Mode

Interface Config

9-20

Routing Commands

202-10009-01_060204

Page 202
Image 202
NETGEAR 7300 Series user manual Hostroutesaccept, Ip address, No hostroutesaccept, No ip address