NETGEAR 7300 Series Dot1x user, Radius accounting mode, No dot1x timeout, No dot1x user

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

no dot1x timeout

This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to the default values. Depending on the token used, the corresponding default values are set.

Format	no dot1x timeout {reauth-period quiet-period tx-period supp-
	timeout server-timeout}
Mode	Interface Config

dot1x user

This command adds the specified user to the list of users with access to the specified port or all ports. The <user> parameter must be a configured user.

Format	dot1x user <user> {<slot/port> all}
Mode	Global Config
no dot1x user

This command removes the user from the list of users with access to the specified port or all ports.

Format	no dot1x user <user> {<slot/port> all}
Mode	Global Config

radius accounting mode

This command is used to enable the RADIUS accounting function.

Default	Disabled
Format	radius accounting mode
Mode	Global Config

no radius accounting mode

This command is used to set the RADIUS accounting function to the default value - i.e. the RADIUS accounting function is disabled.

Format	no radius accounting mode
Mode	Global Config
Switching Commands	8-101

202-10009-01_060204