User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

set garp timer join

This command sets the GVRP join time per port and per GARP. Join time is the interval between the transmission of GARP Protocol Data Units (PDUs) registering (or re-registering) membership for a VLAN or multicast group.

This command has an effect only when GVRP is enabled. The time is from 10 to 100 (centiseconds)

Default

20 centiseconds (0.2 seconds)

Format

set garp timer join <10-100>

Mode

Interface Config

no set garp timer join

 

This command sets the GVRP join time per port and per GARP to 20 centiseconds (0.2 seconds). This command has an effect only when GVRP is enabled.

Format

no set garp timer join

Mode

Interface Config

set garp timer join all

This command sets the GVRP join time for all ports and per GARP. Join time is the interval between the transmission of GARP Protocol Data Units (PDUs) registering (or re-registering) membership for a VLAN or multicast group.

This command has an effect only when GVRP is enabled. The time is from 10 to 100 (centiseconds)

Default

20 centiseconds (0.2 seconds)

Format

set garp timer join all <10-100>

Mode

Global Config

no set garp timer join all

 

This command sets the GVRP join time for all ports and per GARP to 20 centiseconds (0.2 seconds). This command has an effect only when GVRP is enabled.

Format

no set garp timer join all

Mode

Global Config

 

 

Switching Commands

8-45

202-10009-01_060204

Page 111
Image 111
NETGEAR 7300 Series user manual Set garp timer join all, No set garp timer join all