
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
New LSAs Originated | The number of new |
| inated. |
LSAs Received | The number of |
| be new instantiations. |
External LSDB Limit | The maximum number of |
| that can be stored in the |
show ip ospf area
This command displays information about the area. The <areaid> identifies the OSPF area that is being displayed.
Format | show ip ospf area <areaid> |
Mode | Privileged EXEC and User EXEC |
AreaID | Is the area id of the requested OSPF area. |
Aging Interval | Is a number representing the aging interval for this area. |
External Routing | Is a number representing the external routing capabilities for this |
| area. |
Authentication Type Is the configured authentication type to use for this area. | |
Spf Runs | Is the number of times that the |
| culated using this area's |
Area Border Router Count The total number of area border routers reachable within this area.
Area LSA Count | Total number of |
| database, excluding AS External LSA's. |
Area LSA Checksum | A number representing the Area LSA Checksum for the specified |
| AreaID excluding the external (LS type 5) |
| ments. |
Stub Mode | Represents whether the specified Area is a stub area or not. The |
| possible values are enabled and disabled. This is a configured |
| value. |
Import Summary LSAs |
|
Metric Value | Is a number representing the Metric Value for the specified area. |
Metric Type | Is the Default Metric Type for the specified Area. |
|
|
Routing Commands |